# $NetBSD: rc.conf,v 1.85.2.4 2000/08/06 21:39:55 thorpej Exp $ # # see rc.conf(5) for more information. # uncomment this if you want to use local paths in rc #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin # Use program=YES to enable program, NO to disable it. program_flags are # passed to the program on the command line. # If this is not set to YES, the system will drop into single-user mode. rc_configured=YES # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown. do_rcshutdown=YES # Basic network configuration # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu) hostname="noon" # if blank, use /etc/myname # if there's only one way out of your network, set this to the hostname # or the IP address of the router that will get your packets off the LAN. defaultroute="" # if blank, use /etc/mygate #HF#defaultroute="192.168.0.1" # if blank, use /etc/mygate #HF#ifconfig_ne2="192.168.0.222" # the NIS domain name (formerly known as Yellow Pages); not in any way # related to Internet domain names. domainname="" # if blank, use /etc/defaultdomain # Filesystems to mount early in boot-up critical_filesystems_beforenet="/usr /var" critical_filesystems="" # Set this to YES if you have purposefully setup no swap partitions and # don't want to be warned about it no_swap=NO # One-time actions and programs on boot-up. lkm=NO # run /etc/rc.lkm savecore=YES savecore_flags="-z" clear_tmp=YES # clear /tmp after reboot update_motd=YES # updates /etc/motd dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot accounting=NO # needs /var/account/acct # NOTE: default coredump name now set in /etc/sysctl.conf # Security setting. If $securelevel is non-empty, the system securelevel # is set to this value early in the boot sequence. Otherwise the default # action is taken (see init(8)). securelevel="" # securelevel to set to # To set the IP address of an interface either use # ifconfig_xxN="IP-NO" # where xxN is the interface. The this variable is not set the # contents of the file /etc/ifconfig.xxN is used. # Networking startup ipfilter=NO # uses /etc/ipf.conf ipnat=NO # uses /etc/ipnat.conf ipsec=NO # uses /etc/ipsec.conf ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages auto_ifconfig=YES # config all avail. interfaces net_interfaces="" # used only if above is NO flushroutes=YES # flush routes in netstart dhclient=YES # behave as a DHCP client dhclient_flags="" # blank: config all interfaces ntpdate=NO ntpdate_hosts="" # blank: hosts in /etc/ntp.conf ppp_peers="" # /etc/ppp/peers to call ip6mode=autohost # host, autohost or router rtsol=YES rtsol_flags="" # for ip6mode=autohost only # Daemons required by servers. These are not needed for strictly client use. # inetd is used to start the IP-based services enabled in /etc/inetd.conf inetd=YES inetd_flags="-l" # -l logs libwrap # rpcbind is used to look up RPC-based services. rpcbind=NO rpcbind_flags="-li" # -l logs libwrap # Commonly used daemons syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only cron=YES named=NO named_flags="" timed=NO timed_flags="" ntpd=NO ntpd_flags="" sendmail=NO sendmail_flags="-bd -q30m" postfix=NO lpd=NO lpd_flags="-s" # -s "secure" unix domain only # Routing daemons routed=NO routed_flags="-q" gated=NO gated_flags="" mrouted=NO mrouted_flags="" route6d=NO route6d_flags="" rtsold=NO rtsold_flags="" # for ip6mode=autohost only # Daemons used to boot other hosts over a network rarpd=NO rarpd_flags="-a" bootparamd=NO bootparamd_flags="" dhcpd=NO dhcpd_flags="-q" dhcrelay=NO dhcrelay_flags="" rbootd=NO rbootd_flags="" mopd=NO mopd_flags="-a" rtadvd=NO rtadvd_flags="" # X11 daemons: xfs=NO xfs_flags="" # X11 font server xdm=NO xdm_flags="" # X11 display manager # YP (NIS) daemons ypbind=NO ypbind_flags="" ypserv=NO ypserv_flags="-d" yppasswdd=NO yppasswdd_flags="" # NFS daemons and parameters nfs_client=NO # enable client daemons nfs_server=NO # enable server daemons mountd_flags="" nfsd_flags="-6tun 4" lockd=NO lockd_flags="" statd=NO statd_flags="" amd=NO amd_flags="-l syslog -x error,noinfo,nostats" amd_dir=/amd # mount dir amd_master=/etc/amd/master # master map # Heimdal Kerberos 5 KDC (with Kerberos IV compatibility) kdc=NO kdc_flags="" # Other daemons rwhod=NO # Hardware daemons apmd=YES apmd_flags="" # APM power management daemon. screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker # configuration of "wscons" console driver virtual screens wscons=YES wscons_flags="" # run /etc/rc.wscons # Add local configurations if [ -f /etc/rc.local.conf ]; then . /etc/rc.local.conf fi